Civil Engineering Senior · Structural Design · Field Engineering · NYC / Long Island
Built from the field up.
Kyle A. Dunn is a Civil Engineering student at Hofstra University pursuing a Bachelor of Science in Civil Engineering with a Minor in Mathematics, expected December 2026. His path into engineering is shaped by hands-on field experience, academic discipline, and a strong interest in the built environment.
Since July 2023, Kyle has worked with Municipal Testing Laboratories, gaining real construction experience across New York City and Long Island. His work includes special inspections, construction materials testing, field documentation, drawing and submittal review, contractor coordination, and quality-control support for active construction projects.
KAD Consulting is Kyle's professional portfolio and long-term engineering brand, a place to document his growth across civil engineering, field inspection, structural design, construction, business development, and personal leadership.
Ysrael A. Seinuk, P.C.
Selected structural modeling, calculations, drawing review, and technical-development visuals.
Professional project materials are shown only where appropriate. Certain drawings, calculations, project identities, dimensions, and identifying information may be omitted, cropped, redacted, or recreated to protect confidential project information.
During his structural engineering internship at Ysrael A. Seinuk, P.C., Kyle supported the analysis and development of building structures through structural modeling, steel member design, foundation work, drawing review, and engineering coordination.
His experience included working with RAM Structural System and Bluebeam Revu, reviewing existing and proposed framing conditions, assisting with composite steel beam design, evaluating member reactions, supporting foundation development, reviewing shop drawings and RFIs, and studying wind loading for rooftop structural components.
The internship strengthened Kyle’s understanding of structural load paths, constructability, design documentation, engineering judgment, and the relationship between calculations, structural drawings, and field execution.
Municipal Testing Laboratories
Inspection, materials testing, and jobsite documentation from Kyle's work with Municipal Testing Laboratories.
Certain project names, dimensions, drawings, and identifying details may be omitted or recreated to protect confidential project information.
Deep Foundation Installation
Reinforced Concrete Placement
Reinforcement Layout Verification
Spray-Applied Fireproofing Inspection
Masonry Facade Quality Review
Concrete Core Sampling
Concrete Strength Testing
Field Density & Compaction Testing
Heavy Civil Night Operations
Parapet Condition Assessment
At Municipal Testing Laboratories, Kyle supports inspection and materials-testing operations across active construction projects in New York City and Long Island. His work involves translating approved drawings, project specifications, and code requirements into field verification activities.
Through concrete, masonry, structural steel, fireproofing, soil, and pavement-related work, Kyle has developed practical knowledge of how structural systems are constructed, inspected, documented, and coordinated in the field.
This experience has strengthened his understanding of reinforcement placement, material behavior, constructability, quality control, field documentation, and communication between contractors, inspectors, and design professionals.
kyle@kadconsulting.org
Structural and field experience in practice.
Supported structural modeling, steel member design, foundation development, drawing review, and design coordination for building projects. Worked with RAM Structural System and Bluebeam Revu to evaluate framing conditions, review member reactions, assist with composite steel design, study structural load paths, and contribute to engineering documentation under professional supervision.
Perform field inspections and materials testing across active construction sites in New York City and Long Island. Inspection experience includes concrete, masonry, structural steel, fireproofing, soil, and asphalt work performed in accordance with project specifications, approved drawings, and applicable code requirements.
Prepare daily inspection reports, document field conditions, maintain quality-control records, and communicate with contractors, site supervisors, and design professionals to help resolve field issues and support project compliance.
Support daily operations of Hofstra's engineering makerspace, including equipment training, safety procedures, project support, and fabrication workflows. Train students and faculty on CNC machines, ShopBot systems, laser cutters, resin and FDM 3D printers, soldering tools, and digital manufacturing processes.
Assist with engineering coursework, workshops, prototype development, lab organization, and safe equipment use.
Hofstra University
Provost's List
Dean's List
Order of the Engineer
Structural Analysis I and II
Design of Reinforced Concrete Structures
Design of Steel Structures — In Progress
Advanced Strength of Materials
Strength of Materials
Soil Mechanics and Foundation Engineering
Engineering Materials
Transportation Engineering
Project Management
Engineering Mathematics
Fluid Mechanics
Hydraulic Engineering and Water Resources
Environmental Engineering
Acting Co-Director / Makerspace Lab Technician
Founding Engineering Chair, Hofstra Robotics Club
Engineering Chair, Biomedical Engineering Society
American Society of Civil Engineers, Student Member
Engineers in Action, Member
Pride Guide / Student Ambassador
USAMO / USAJMO Exam Proctor
Selected engineering work.
Structural design project involving reinforced concrete behavior, member design, strength checks, reinforcement requirements, and detailing considerations.
Conceptual steel-framing study involving tributary areas, gravity loads, beam and girder behavior, member selection, load paths, strength considerations, and serviceability checks.
Transportation engineering project involving traffic counts, trip generation, intersection analysis, signal-warrant review, and traffic-impact evaluation.
First-place team design challenge focused on engineering creativity, problem solving, communication, and multidisciplinary design thinking.
Programming work using MATLAB to develop interactive computational tools, including a scientific calculator and other logic-based applications.
Getting to know Kyle.
I come from little old Stewart Town in Trelawny, Jamaica, it’s a beautiful place but, if you look for it on a map, all you see are trees. But to me, it is more than a dot on a map. It is where I learned what it means to show up, to take care of people, and to keep going even when life does not make the road easy.
A lot of who I am comes from my grandparents. They have both passed away, but the way they lived still follows me. We did not have everything, and like many families back home, there were financial hardships. But somehow, they always made sure I was happy, cared for, and surrounded by love. My grandfather taught me duty without ever needing to give a speech about it. I remember waking up early to follow him to tend to the crops, dragging those big goats out to graze, and making sure the pigs were fed. That was my first understanding of responsibility: not something you say, but something you do every day regardless of what side of the bed you woke up on.
My grandmother gave me a different kind of strength. She taught me to be kind, to care about people, and to carry ambition with compassion. She had a way of making people feel seen and loved. Both of my grandparents were loved in the community because they looked out for others, and that has stayed with me. I think about that often, that being respected is not only about what you accomplish, but about how people feel when they cross your path.
My mother is the constant driver behind the road I am on now. She has worked hard her entire life and sacrificed opportunities of her own to help push me forward. No matter what she has faced, she keeps looking ahead, keeps aspiring, and keeps reminding me to stay true to the path I am building. My brother, my cousins, my aunts and uncles are a big part of that foundation too, a reminder that what I do is not only for myself but for those who have been there along the way.
Engineering, for me, is not just about calculations, drawings, or job titles. It is about building things that last, understanding the details that hold them together, and becoming someone who can be trusted with responsibility. I want to be a well-rounded engineer, but more than that, I want to be a well-rounded person.
I grew up playing outside, riding my bike, playing football and cricket with friends. Going to the river and the beach, picking fruit straight from the trees: mangoes, starfruit, coconuts, apples, and whatever else was in season. As life gets busier with school, work, internships, and trying to grow into the future I imagine, I still want to stay connected to that part of myself. I want to read more deeply when I finally have the time, learn guitar, travel the world, and leave something meaningful with the people I meet and the places I go.
KAD Consulting is part of that bigger vision. It is not just a name or a website. It is a record of the person I am becoming. Someone shaped by family, struggle, nature, discipline, construction, engineering, and the belief that every strong future starts with a solid foundation.